@article {1107,
	title = {Enumeration algorithm for determination of binding constants in capillary electrophoresis},
	journal = {Analytical Chemistry},
	volume = {77},
	number = {8},
	year = {2005},
	note = {ISI Document Delivery No.: 919FZTimes Cited: 11Cited Reference Count: 16},
	month = {Apr},
	pages = {2415-2420},
	type = {Article},
	abstract = {With more accurate simulation models and more efficient algorithms becoming available, the binding constants of an affinity interaction can be obtained from much simpler experiments using capillary electrophoresis. With the enumeration algorithm, all possible combinations of the binding constant and the complex mobility in certain ranges that could result in the experimental migration time of an injected analyte are extracted from a 3-D surface, which depicts the migration times resulting from different values of the binding constant and the mobility of the complex formed between the interacting pair, to form a 2-D curve. When the experimental conditions are changed, the analyte migration time will also change. A new 2-D curve can be constructed from another 3-D surface on the basis of the pairs of binding constants and complex mobility values that could result in the new migration time. Because the true binding constant and complex mobility values have to be the same for both experimental conditions under the same temperature, there has to be a point where both 2-D curves will converge. The coordinates of the converging point give the values for a binding constant and a complex mobility that will fit all 2-D curves generated under certain experimental conditions. p-Nitrophenol is used as the analyte, beta-cyclodextrin is used as the additive, and a one-cell model is used to simulate affinity CE. The experimental conditions that can improve the accuracy of the binding constants are discussed.},
	keywords = {DYNAMIC COMPLEXATION, ERROR PROPAGATION, MIGRATION BEHAVIOR, MONTE-CARLO-SIMULATION, NUMERICAL-SIMULATION, QUANTITATIVE DESCRIPTION, RANGE, RECTANGULAR HYPERBOLAE, SEPARATION, ZONE-ELECTROPHORESIS},
	isbn = {0003-2700},
	url = {<Go to ISI>://000228605100018},
	author = {Fang, N. and Chen, D. D. Y.}
}
@article {849,
	title = {Determination of shapes and maximums of analyte peaks based on solute mobilitiess in capillary electrophoresis},
	journal = {Analytical Chemistry},
	volume = {76},
	number = {6},
	year = {2004},
	note = {ISI Document Delivery No.: 803IQTimes Cited: 11Cited Reference Count: 28},
	month = {Mar},
	pages = {1708-1714},
	type = {Article},
	abstract = {In capillary electrophoresis, the relative orders of mobilities of analyte, additive, and the complex formed determine the analyte peak shape in a way similar to the way the binding isotherms determine the peak shapes in chromatography. The three mobilities allow six possible orders; each produces a characteristic peak shape in CE. Equations describing the analyte migration in a CE system with the presence of mobility-changing additives can be implemented into computer programs to predict the migration times of the analyte peak maximums, and the predicted migration times agree well with the experimental results.},
	keywords = {DISPERSION, DYNAMIC COMPLEXATION, FLOW, MIGRATION BEHAVIOR, NUMERICAL-SIMULATION, pressure, QUANTITATIVE DESCRIPTION, SEPARATIONS, ZONE-ELECTROPHORESIS},
	isbn = {0003-2700},
	url = {<Go to ISI>://000220225200023},
	author = {Fang, N. and Ting, E. and Chen, D. D. Y.}
}
@article {341,
	title = {Accurately describing weak analyte-additive interactions by capillary electrophoresis},
	journal = {Electrophoresis},
	volume = {23},
	number = {6},
	year = {2002},
	note = {ISI Document Delivery No.: 536KNTimes Cited: 12Cited Reference Count: 33},
	month = {Mar},
	pages = {880-888},
	type = {Article},
	abstract = {When modeling analyte-additive interactions in capillary electrophoresis (CE), it is necessary to correct for all changes in the apparent electrophoretic mobility of an analyte that are not due to specific binding. Current models based on dynamic complexation have corrected for bulk viscosity changes in the background electrolyte (BGE) when additives are used, while assuming negligible changes in the dielectric constant and other physicochemical properties of the solution. In this report, a study of weak interactions between deoxyribonucleotides and hydroxypropyl-beta-cyclodextrin (HP-beta-CD) revealed significant nonideality in binding isotherms. Changes in the dielectric properties of the solution due to the addition of high concentrations of HP-beta-CD to the BGE was observed to alter the electrophoretic mobility of analytes. A relative dielectric correction factor was required to normalize analyte mobilities to a reference state of zero additive concentration. The use of both a relative dielectric factor and a viscosity correction factor was found to increase the accuracy of the model, reflected by a higher degree of correlation between predicted and measured analyte mobilities. This type of correction is particularly relevant when studying weak analyte binding interactions or when using high concentrations of additive in the BGE. This work is vital for accurate determination of weak binding constants and mobility values, as well as providing a deeper understanding of the fundamental parameters influencing a separation in CE.},
	keywords = {analyte-additive interactions, BETA-CYCLODEXTRIN, binding isotherms, capillary electrophoresis, CHIRAL SEPARATION, cyclodextrin, deoxyribonucleotides, DYNAMIC COMPLEXATION, ELECTROKINETIC CHROMATOGRAPHY, ELECTROPHORESIS, ENANTIOMERS, MIGRATION BEHAVIOR, MODEL, OPTIMIZATION, QUANTITATIVE DESCRIPTION, viscosity-dielectric corrections factors, weak, ZONE},
	isbn = {0173-0835},
	url = {<Go to ISI>://000174699400008},
	author = {Britz-McKibbin, P. and Chen, D. D. Y.}
}
@article {4100,
	title = {Quantitative description of analyte migration behavior based on dynamic complexation in capillary electrophoresis with one or more additives},
	journal = {Electrophoresis},
	volume = {18},
	number = {5},
	year = {1997},
	note = {ISI Document Delivery No.: XC565Times Cited: 48Cited Reference Count: 28},
	month = {May},
	pages = {706-716},
	type = {Article},
	abstract = {A comprehensive theory is proposed to describe the migration behavior of analytes in capillary electrophoresis (CE) when one or more additives are present in the buffer solution. This theory amalgamates and extends the previous work done by others. The capacity factor (k{\textquoteright}) in this theory is defined as the product of the equilibrium constant and the additive concentration, thus, k{\textquoteright} changes linearly with additive concentration, The net electrophoretic mobility of an analyte is a function of k{\textquoteright}, therefore, it can be changed by varying the additive concentration. Three parameters are needed to predict the mobility of an analyte in a one-additive CE system: the mobility of the free analyte, the mobility of the complex, and the equilibrium constant for the analyte-additive interaction (which determines the fraction of the free analyte at different additive concentrations). When additives are used, the change in viscosity obscures this relationship, therefore, a viscosity correction factor is required to convert all mobilities to an ideal state where the viscosity remains constant. The migration behavior of an analyte in a solution with multiple additives can be predicted and controlled, once the equilibrium constants of the interactions between the analyte and each of the additives are obtained separately. beta-Cyclodextrin and hydroxypropyl-beta-cyclodextrin are used as additives and the migration behavior of phenol, p-nitrophenol, and benzoic acid are studied as a model system to verify this theory. When the necessary viscosity correction factor is included, the net electrophoretic mobilities of the analytes obtained from experimental results agree with the values predicted by the theory based on dynamic complexation. Although only experiments with one and two additives were carried out to verify the theory, the equations apply to situations when more than two additives are used. The relationship between the theories of electrophoresis and chromatography is clarified.},
	keywords = {additives, analyte migration, BEHAVIOR, BETA-CYCLODEXTRIN, BINDING, capillary electrophoresis, CHIRAL RESOLUTION, DYNAMIC COMPLEXATION, ELECTROKINETIC CHROMATOGRAPHY, OPTIMIZATION, SELECTIVITY, SEPARATION, viscosity correction},
	isbn = {0173-0835},
	url = {<Go to ISI>://A1997XC56500008},
	author = {Peng, X. J. and Bowser, M. T. and BritzMcKibbin, P. and Bebault, G. M. and Morris, J. R. and Chen, D. D. Y.}
}
@article {3909,
	title = {Quantitative description of migration behavior of porphyrins based on the dynamic complexation model in a nonaqueous capillary electrophoresis system},
	journal = {Electrophoresis},
	volume = {18},
	number = {1},
	year = {1997},
	note = {ISI Document Delivery No.: WH231Times Cited: 47Cited Reference Count: 48},
	month = {Jan},
	pages = {82-91},
	type = {Article},
	abstract = {The effect of an additive (Brij 35) on the mobilities of a group of porphyrin acids is quantitatively characterized based on a 1:I dynamic complexation model. Varying additive concentration shifts the equilibrium and changes the viscosity of the background electrolyte. The equilibrium constant, the electrophoretic mobility of the free analyte, and the electrophoretic mobility of the complex are identified as the parameters necessary to describe the analytes{\textquoteright} migration behavior. Several statistical methods for obtaining these parameters are discussed. The equilibrium constants and complex mobilities are calculated using three different linear regression methods. The weighted y-recip-rocal method was preferred because it gives smaller error, and the data points are evenly distributed along the concentration axis. These values are confirmed using a nonlinear regression to ensure that the proper weighting was used in the linear regression plots. The parameters are then used to predict the apparent mobilities of the analytes over the entire additive concentration range, allowing the optimum separation conditions to be identified. For disclike molecules, such as porphyrins, the mobility is determined by the orientation of the molecule in an electric field, in addition to their size and charge. The strength of binding between the porphyrins and Brij 35 depends on the number of binding sites and the solvation shell.},
	keywords = {additives, AFFINITY, ANIONS, BETA-CYCLODEXTRIN, BINDING, CHIRAL SEPARATION, DYNAMIC COMPLEXATION, ENANTIOMERS, nonaqueous capillary electrophoresis, PARAMETERS, PORPHYRIN, SELECTIVITY, SELECTORS, separation theory, TIOCONAZOLE, ZONE ELECTROPHORESIS},
	isbn = {0173-0835},
	url = {<Go to ISI>://A1997WH23100016},
	author = {Bowser, M. T. and Sternberg, E. D. and Chen, D. D. Y.}
}
