@article {29150,
	title = {Electrocatalytic Alloys for CO2 Reduction},
	journal = {ChemSusChem},
	volume = {11},
	year = {2018},
	pages = {48-57},
	abstract = {<p>Abstract Electrochemically reducing CO2 using renewable energy is a contemporary global challenge that will only be met with electrocatalysts capable of efficiently converting CO2 into fuels and chemicals with high selectivity. Although many different metals and morphologies have been tested for CO2 electrocatalysis over the last several decades, relatively limited attention has been committed to the study of alloys for this application. Alloying is a promising method to tailor the geometric and electric environments of active sites. The parameter space for discovering new alloys for CO2 electrocatalysis is particularly large because of the myriad products that can be formed during CO2 reduction. In this Minireview, mixed-metal electrocatalyst compositions that have been evaluated for CO2 reduction are summarized. A distillation of the structure\&ndash;property relationships gleaned from this survey are intended to help in the construction of guidelines for discovering new classes of alloys for the CO2 reduction reaction.</p>},
	keywords = {ALLOYS, CO2 reduction, electrocatalysis, electrolysis, heterogeneous catalysis},
	doi = {10.1002/cssc.201701825},
	url = {https://onlinelibrary.wiley.com/doi/abs/10.1002/cssc.201701825},
	author = {He, J. and Johnson, N. J. and Huang, A. and Berlinguette, C. P.}
}
@article {2851,
	title = {EXCESS PARTIAL MOLAR ENTHALPIES AND FREE-ENERGIES IN METHANOL ISOBUTANOL MIXTURES AT 20-DEGREES-C - THE EFFECT OF SIZE DIFFERENCE},
	journal = {Thermochimica Acta},
	volume = {230},
	year = {1993},
	note = {ISI Document Delivery No.: MW430Times Cited: 0Cited Reference Count: 10},
	month = {Dec},
	pages = {39-53},
	type = {Article},
	abstract = {The excess partial molar enthalpies, H(m)E(i), and free energies, G(m)E(i), (where i is methanol or isobutanol) were determined at 20.00-degrees-C in methanol-isobutanol mixtures. The Bhatia-March approach (J. Phys. F, 5 (1975) 1100), taking into account the size difference between the components within the framework of the conformational solution theory, was applied to explain the composition dependence of H(m)E(i) and G(m)E(i). It was reasonably successful : however, it did not seem to work for the other isomeric butanol and methanol mixtures.},
	keywords = {25 DEGREES C, ALLOYS, BUTANOL, CONCENTRATION FLUCTUATIONS, NA-CS, SYSTEMS, WATER},
	isbn = {0040-6031},
	url = {<Go to ISI>://A1993MW43000004},
	author = {Lai, J. T. W. and Kam, J. S. C. and Lau, F. W. and Beach, L. J. and Koga,Yoshikata}
}
@article {7314,
	title = {THE GROWTH OF ZIRCONIUM-OXIDE THIN-FILMS ON AU(111) SINGLE-CRYSTAL SURFACES},
	journal = {Applied Surface Science},
	volume = {62},
	number = {3},
	year = {1992},
	note = {ISI Document Delivery No.: JR191Times Cited: 9Cited Reference Count: 30},
	month = {Oct-Nov},
	pages = {175-180},
	type = {Article},
	abstract = {The deposition on to a Au(111) surface of a few monolayers of zirconium in an oxygen atmosphere at 10(-7) Torr can yield, after a brief anneal at around 1025 K, thin crystalline films of cubic zirconium oxide grown parallel to the (111) plane- These observations quite closely parallel those in a recent report for epitaxial ZrO2 growth on Pt(111), and the samples produced appear suitable for the surface science study of this material. Contrasting growth modes are observed depending on whether or not the substrate is gently annealed during the deposition process. With prolonged heating of the ZrO2 film at 1025 K, or above, there is a decrease in the Auger signals of both Zr and O, and an increase for Au.},
	keywords = {ALLOYS, COATINGS, DIFFUSION, METALLIC-GLASS FORMATION, VAPOR-DEPOSITION, ZRO2},
	isbn = {0169-4332},
	url = {<Go to ISI>://A1992JR19100009},
	author = {Lou, J. R. and Hess, U. and Mitchell, K. A. R.}
}
