@article {910,
	title = {Synthesis of well-defined environmentally responsive polymer brushes by aqueous ATRP},
	journal = {Macromolecules},
	volume = {37},
	number = {3},
	year = {2004},
	note = {ISI Document Delivery No.: 771TWTimes Cited: 102Cited Reference Count: 56},
	month = {Feb},
	pages = {734-743},
	type = {Article},
	abstract = {Functionalized anionic polystyrene latex particles with ATRP initiators were synthesized by surfactant-free shell-growth emulsion polymerization of styrene and 2-(2{\textquoteright}-chloropropionato)ethyl acrylate (HEA-Cl). N-Isopropylacrylamide (NIPAM) was polymerized from these particles by surface-initiated aqueous ATRP using PMDETA/CuCl and HMTETA/CuCl catalysts to synthesize poly(N-isopropylacrylamide) (PNIPAM) brushes. The grafted latexes were characterized for molecular weight of the PNIPAM chains, grafting density, and hydrodynamic thickness of the grafted polymer layer. Molecular weights of the grafted PNIPAM chains depended on the monomer concentration, concentration of copper(II) complex, and the presence of external initiator in the reaction medium. M-n of the grafted chains increases with increase in the monomer concentration and decreases with addition of copper(II) complex and external initiator. The HMTETA/CuCl catalyst produces higher molecular weight chains than PMDETA/CuCl. Molecular weights from similar to50 000 to 800 000 with low polydispersities, between 1.25 and 1.4, were achieved. The grafting density of PNIPAM on the surface increases with increasing monomer concentration and decreases with addition of copper(II) catalyst and external initiator. Block copolymerization of N,N-dimethylacrylamide from PNIPAM-grafted latex demonstrated that the chains are terminated with a chlorine atom, and the grafting reactions are taking place by the ATRP mechanism. The hydrodynamic thickness (HT) of the grafted PNIPAM layer scales as DP0.66 (where DP = degree of polymerization) at constant grafting density (chains/nm(2)). The HT values for PNIPAM brushes are sensitive to temperature and salt concentration. Since the transition from extended coil to collapsed structure occurs over a range of temperature and salt concentration, it follows a second-order transition, as predicted by theory. The thickness of the collapsed brush is sensitive to the type of stimulus used to induce the phase transition.},
	keywords = {GLOBULE TYPE TRANSITIONS, INTERFACES, N-DIMETHYLACRYLAMIDE) BRUSHES, PARTICLES, POLY(N, POLY(N-ISOPROPYLACRYLAMIDE), PROTEIN, SILICA, SURFACE-INITIATED POLYMERIZATIONS, TEMPERATURE, TRANSFER RADICAL POLYMERIZATION},
	isbn = {0024-9297},
	url = {<Go to ISI>://000188803000010},
	author = {Kizhakkedathu, J. N. and Norris-Jones, R. and Brooks, D. E.}
}
@article {5111,
	title = {Characterization of aluminum surfaces after different pretreatments and exposure to silane coupling agents},
	journal = {Surface Review and Letters},
	volume = {8},
	number = {1-2},
	year = {2001},
	note = {ISI Document Delivery No.: 424EFTimes Cited: 11Cited Reference Count: 34},
	month = {Feb-Apr},
	pages = {43-50},
	type = {Article},
	abstract = {X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and scanning electron microscopy (SEM) have been used to characterize surfaces of aluminum which have been pretreated by mechanical polishing, acid etching and alkaline etching, as well as given subsequent exposures to air and water. These surfaces can differ markedly with regard to their chemical compositions and topographical structures. Characterizations of these surfaces after exposures to three organosilanes, gamma -GPS, BTSE and gamma -APS, indicate that the amount of silane adsorbed in each case shows a tendency to increase both with the number of OH groups detected at the oxidized aluminum and with the surface roughness. The XPS data are consistent with the adhesion of gamma -APS occurring through H bonding, especially via NH3+ groups.},
	keywords = {ADHESION, DURABILITY, GROWTH, INTERFACES, OXIDATION, OXIDE, photoelectron, THIN-FILMS, XPS},
	isbn = {0218-625X},
	url = {<Go to ISI>://000168218600007},
	author = {Kono, M. and Sun, X. and Li, R. and Wong, K. C. and Mitchell, K. A. R. and Foster, T.}
}
